Your Location: Home> Product>Low foaming surfactant for cleaning agent of beer bottle, wine bottle and beverage bottle>Chelating and dispersing agent (the best auxiliary for strong dirt removal, rust removal, optical glass, bottle cleaner)
TA-E dirt dispersant
(Auxiliary for spraying, soaking, ultrasonic, electrolytic degreasing cleaning agent to replace phosphorus)
(Auxiliary agent for phosphorus-free environmental cleaning agent to replace phosphorus)
1. It has a good complexing power to calcium and magnesium ions, strong alkali resistance, unique super strong oil stain carrying and dispersing power, and excellent collaborative detergency;
2. The compound of organic polymer and special high molecular compound can exert good performance in a small amount;
3. High temperature resistance and salting out resistance, with good hard water softening power;
4. Phosphorus-free, environmentally friendly, excellent washability and matching;
5. No precipitation at high temperature (0 ~ 100 ℃) and super alkalinity;
6. Excellent resistance to hard water, wide range of PH values;
7. Combined with conventional additives and surfactants, it becomes a high-quality degreasing agent and cleaning agent.
Generally used to soak industrial detergents, such as metal cleaning agents, metal degreasing agents, cleaning additives, etc. The most common typical uses are medium and high temperature immersion cleaning and dewaxing agents, phosphorus-free environmentally friendly cleaning and dewaxing agents, and medium and high temperature degreasing and dewaxing additives. .
*** The recommended dosage is 1 ~ 10% in the preparation of defatted powder (agent) ***
主要技术指标
数据项目 |
(典型值)
|
备注(不作为产品检测依据) |
主要成份 |
氨基乙醇类化合物 |
|
离子特性 |
有机聚合物与特殊高分子化合物的复合物 |
|
外观(25℃) |
无色~黄色粘稠液体 |
|
pH值(1%水溶液) |
9.5 ~ 12.0 |
|
HLB |
11 ~ 13 |
|
静态表面张力(1%水溶液) |
56.4mN∕m |
|
粘度(25℃) |
959mpa.s |
|
比重(密度)(20℃) |
1.14 ± 0.03 |
|
浊点(1%水溶液) |
>85℃ |
|
0.1%泡沫性能(mm) 50℃±2℃(罗氏泡沫仪) |
0mm |
|
凝固点 |
11℃ |
|
水溶性(室温) |
无析出物 |
|
|
|
|
检验方法
a. 外观:目测
b. pH值:用酸度计测定。
c. 清洗率:按JB/T 4323.2-1999中第6章规定进行。
d. 泡沫性能::按QB/T 7462-94中规定进行。
e. 水溶性:称取15g样品溶于500ml蒸馏水中,加热至30℃并搅拌3min,搅拌均匀后观察。观察后冷至室温,再观察。