Your Location: Home ProductSurfactant for precision cleaningLow-foam non-foaming surfactant (for spray cleaning, suitable for preparing cleaning powder, or cleaning powder and cleaning liu shuang component products)

Product
Low-foam non-foaming surfactant (for spray cleaning, suitable for preparing cleaning powder, or cleaning powder and cleaning Liu Shuang component products)
Product Model Product Name Temperature Description
RQ-122HG 低泡表面活性剂 常温至常温以上
常温使用、低泡沫、清洗力强、耐酸碱、与常规助剂配合便成高品质喷淋清洗剂、仅用于喷淋产品,不适用于浸泡处理场合。
AR-20 低泡表面活性剂 常温至常温以上
低泡沫、不含有机硅与任何消泡剂、清洗力强、清洗后喷淋水洗槽低泡沫,易漂洗,加温使用时对清洗过程中由于皂化产生肥皂泡沫的消泡性好、耐强酸碱、与常规助剂配合便成高品质喷淋清洗剂。
AR-30 低泡表面活性剂 ≥30℃
30℃以上使用泡沫少、不含有机硅与任何消泡剂、清洗力强、清洗后喷淋水洗槽低泡沫,易漂洗,耐酸碱、与常规助剂配合便成高品质清洗剂。
AR-40 低泡表面活性剂 ≥40℃
40℃以上使用泡沫少、不含有机硅与任何消泡剂、清洗力强、耐酸碱、清洗后喷淋水洗槽低泡沫,易漂洗,品质好、与常规助剂配合便成高品质清洗剂。
HA-11 低泡表面活性剂 常温至常温以上
低泡沫、环保产品,不含有机硅与任何消泡剂、清洗力强、清洗后喷淋水洗槽低泡沫,易漂洗,加温使用时对清洗过种中由于皂化产生肥皂泡沫的消泡性好、耐酸碱。
HA-13 低泡表面活性剂 ≥30℃
30℃以上使用泡沫少、不含有机硅与任何消泡剂、清洗力强、耐碱、耐酸、价格低、与常规助剂配合便成高品质清洗剂。
HA-18 低泡表面活性剂 ≥40℃
中低温使用、(无)泡沫、不含有机硅与任何消泡剂、清洗力强、耐强碱、可清除重油污、动态除油污力极强、最适合低泡强碱性清洗剂、与常规助剂配合便成高品质清洗剂。
HA-19 低泡表面活性剂 ≥40℃
中低温使用、低(无)泡沫、不含有机硅与任何消泡剂、清洗力强、耐强碱、可清除重油污、动态除油污力极强、对清洗过程中肥皂泡沫的消泡性好、最适合低泡强碱性清洗剂、与常规助剂配合便成高品质清洗剂。
RQ-127HE 低泡表面活性剂 适宜
低(无)泡沫、不含有机硅与任何消泡剂、清洗力强、耐强碱、对清洗过程中肥皂泡沫的消泡性好、最适合用于清洗含动植物油污或易起泡油污的低泡强碱性清洗剂、与常规助剂配合便成高品质清洗剂。
HA-11D low foam surfactant HA-11D low foam surfactant
1. Main features a. Normal temperature use, very little foam, strong degreasing power, acid and alkali resistance, can meet the spray degreasing cleaning requirements under common pressure. b. Polycarbonate non-ionic surfactant complex, with good biodegradability and environmental protection. c. Excellent washability and matching, no silicone, no defoamer, no adverse effects on the subsequent process. d. Washing foam after degreasing is extremely low. e. Excellent resistance to hard water, suitable for a wide pH range. 2. The application is generally used in normal low temperature non-foaming or industrial detergents, such as metal cleaning agents, metal degreasing agents, etc., and can also be used in rust inhibitors, cutting fluids, etc. The most common typical uses are spray cleaning agents, room temperature spray degreasing agents , High-pressure water washing additives, etc., have good matching for various post-processes. *** In the preparation of defatted powder, the recommended dosage is 2 ~ 6% ***